Estimate construction materials with engineer precision.
Slide your built-up area to calculate bags of cement, tons of TMT steel, sand volumes, aggregates, and block counts instantly based on local structural layouts in Hyderabad.
Configuration
2,000
Estimated Quantities
Cement Required
800 Bags
≈ ₹3.04L
TMT Steel Required
8.0 Tons
≈ ₹5.44L
Sand Required
3,600 CFT
≈ ₹2.70L
Aggregate (20/40mm)
2,600 CFT
≈ ₹1.61L
Red Bricks Required
24,000 Pcs
≈ ₹2.16L
Estimated Turnkey Budget
₹38L – ₹46L
Includes labor, raw materials, architectural engineering & premium finishes.
How much cement and steel is required per square foot for house construction in Hyderabad?
For standard residential RCC framed structures in Hyderabad, you require approximately 0.4 bags of cement per sq ft and 3.5 kg to 4.5 kg of TMT steel per sq ft. For a 2,000 sq ft built-up area, this translates to roughly 800 bags of cement and 8.0 tons of steel.
How many bricks or AAC blocks are needed for a 150 Sq Yard plot construction?
A standard G+1 construction on a 150 Sq Yard plot (approx 2,300 sq ft built-up area) requires about 26,000 to 28,000 red clay bricks for external 9-inch and internal 4-inch walls. If using standard AAC blocks, you will need approximately 1,600 to 1,800 blocks (sized 600x200x150mm for external and 600x200x100mm for internal).
What is the ratio of concrete mix used for slabs and columns in Hyderabad?
Standard residential construction in Hyderabad uses M20 (1:1.5:3 mix ratio) or M25 (1:1:2 mix ratio) grade concrete for structural elements like footings, columns, beams, and roof slabs to ensure high compressive strength and durability.
What is the bulking of sand and why is it checked during construction?
Bulking of sand is the increase in the volume of dry sand caused by the presence of surface moisture, which pushes the sand particles apart. Since aggregate batching is done by volume, moisture can cause under-sanding in the concrete mix. Indek Infra checks sand bulking on-site to adjust mix ratios accurately.